Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Fiat 500L 2014-up
KIT FEATURES
• DDIN radio provision
• Painted scratch-resistant matte black
KIT COMPONENTS
• A) Radio trim panel • B) Brackets
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • XSVI-6523-NAV
Antenna Adapter: • 40-EU55
METRA. The World's best kits.
Installation instructions for part 95-6521B
95-6521B
metraonline.com
™
Table of Contents
Dash Disassembly
– Fiat 500L 2014-up ............................................... 2
Kit Assembly
– DDIN radio provision ............................................ 3
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Torx screwdriver
CAUTION!
Metra recommends disconnecting the negative bat -
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con -
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition
and then wait a few seconds before removing the factory radio.
© COPYRIGHT 2015 METRA ELECTRONICS CORPORATION
Publicidad
Manuales relacionados para Metra 95-6521B
Resumen de contenidos para Metra 95-6521B
- Página 1 • Panel removal tool • Phillips screwdriver • Torx screwdriver CAUTION! Metra recommends disconnecting the negative bat - tery terminal before beginning any installation, unless the vehicle manufacturer recommends against so. Please check with your local Dealership for more information. All accessories, switches, climate controls panels, and especially air bag indicator lights must be con - WIRING &...
-
Página 2: Dash Disassembly
95-6521B Dash Disassembly 1. Unclip the two clips on either side of the boot over the top of the steering column shroud. (Figure A) 2. Unclip and remove the dash trim panel. (Figure B) 3. Remove (6) Torx screws securing the factory radio. -
Página 3: Kit Assembly
(Figure B, shaded area) 2. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. (Figure A) (Figure B) 3. Secure the radio trim panel into... -
Página 4: Important
Installation instructions for part 95-6521B IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. -
Página 5: Características Del Kit
Instrucciones de instalación para la pieza 95-6521B Indice Fiat 500L 2014 y mas 95-6521B Desmontaje del tablero – Fiat 500L 2014 y mas .......... 2 Ensamble del kit – Provisiones de unidad central ISO DDIN ....3 CARACTERÍSTICAS DEL KIT •... -
Página 6: Desmontaje Del Tablero
95-6521B Desmontaje del tablero 1. Desenganche los dos ganchos a cada lado de la base de la palanca de velocidades sobre la parte superior del protector de la columna de dirección. (Figura A) 2. Desenganche y quite el panel de la moldura del tablero. -
Página 7: Ensamble Del Kit
3. Localice el arnés de cables de fábrica en el tablero. Metra recomienda el uso de un adaptador adecuado de acoplamiento de Metra o de AXXESS. Pruebe la (Figura A) (Figura B) unidad para ver si funciona bien. 4. Sujete el panel de la moldura del... -
Página 8: Importante
Instrucciones de instalación para la pieza 95-6521B IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente...