Kit Assembly - Metra 95-6521B Instrucciones De Instalación

DDIN radio provision
1. Attach the brackets to the
aftermarket radio and mount into
the dash opening. (Figure A)
Note: It may be necessary to
cut the small rear support shelf
in the bottom center of the
radio cavity.
(Figure B, shaded area)
2. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
3. Secure the radio trim panel into
the dash over the new radio and
reassemble dash in reverse order
of disassembly.

Kit Assembly

(Figure A)
95-6521B
(Figure B)
3