Stroller Operation; Adjust Backrest; Use Buckle; Use Shoulder & Waist Harnesses - Joie litetrax 4 Manual De Instrucciones

Stroller Operation

Adjust Backrest

see images
-
12 13
There are 4 recline angles for the backrest.
Recline Backrest
To recline the backrest, squeeze the recline handle on the
back of the seat, pull down on the backrest.
Raise Backrest
To raise the backrest, push up.
! Make sure the recline is set properly for use.

Use Buckle

see images
-
14 15
Release Buckle
Press the center button to release the buckle.
Lock Buckle
Match the waist belt buckle with the shoulder buckle
and click into the center buckle.
the buckle is locked completely.
! To avoid serious injury from falling or sliding out, always
secure your child with harness.
! Make sure your child is snugly secured. The space between
the child and the shoulder harness is about the thickness of
one hand.
! Do not cross the shoulder belts. This will cause pressure on
a child's neck.
19
12
13
14
- 1,
15
- 2 A "click" sound means
15
- 3
15
Use Shoulder & Waist Harnesses
see images
-
16 19
! In order to protect your child from falling out, after your child
is placed into the seat, check whether the shoulder and
waist harnesses are at proper height and length.
- 1 Shoulder harness anchor A
16
- 2 Shoulder harness anchor B
16
- 3 Slide adjuster
16
For larger child, use shoulder harness anchor A and the
highest shoulder slots. For smaller child, use shoulder harness
anchor B and the lowest shoulder slots.
To adjust the position of the shoulder harness anchor, turn the
anchor to be level with the side facing forward. Thread it
through the shoulder harness slot from back to front.
Rethread it through the slot that is closest to child's shoulder
height.
18
Use slide adjuster to change the harness length.
Press the button - 2, while pulling the waist harness to
19
proper length. - 3
19

Adjust Calf Support

see images
20
The calf support has 2 positions.
To raise the calf support, push it upwards. A "click" sound
means the calf is locked completely.
To lower calf support, press the adjustment buttons on both
sides of the calf support -
20
downwards. - 2
20
17
- 1
19
1, and rotate the calf support
20