Marshall WOBURN Manual Del Usario página 28

PROBLEM
THE ACTIVE LOUD-
SPEAKER WILL NOT
TURN ON.
THE SOUND IS WEAK
OR THERE IS NO
SOUND AT ALL.
THE SOUND IS
DISTORTED.
SHARP CRACKLING/
CLICKING ON STRONG
PASSAGES/TRANSIENTS.
ERRATIC PERFOR-
MANCE.
028.
TROUBLE SHOOTING
CAUSE
The power cord is not plugged into a
working wall socket or not plugged into
the power jack on the back of the active
loudspeaker.
The 3.5mm cord/input cable/signal cable is
not correctly connected to either the active
loudspeaker or the music player.
The volume level is too low on the active
loudspeaker.
The volume level is too low on the music
player.
The volume level is too high.
The original sound file (mp3) is of poor quality.
Excessive playback volume.
Too much bass/treble boost.
Clipping when the amplifier runs out of
power.
Interference from another source or
electronic device.