Mounting Diagram; Web Server - Chauvet Professional COLORado Solo Batten 4 Guía De Referencia Rápida

EN
Mounting
Before mounting this product, read the
mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to
http://trusst.com/productcategory/truss-clamps/.

Mounting Diagram

Safety cable

Web Server

The COLORado Solo Batten 4 Web Server can be accessed by any computer on the same network as the product. It
allows network access to system information, settings such as control protocol and starting address, color output testing,
and the ability to change the Web Server password.
To access the Web Server:
1. Set the IP address of the network to have the same first digit as the IP address of the product.
2. Enter the IP address of the product into the URL bar of a web browser application.
3. Enter both the user name and password as admin to log in.
Control Panel Description
Button Function
<MENU> Exits from the current menu or function
<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected function
<UP> Navigates upwards through the menu list or increases the numeric value when in a function
<DOWN> Navigates downwards through the menu list or decreases the numeric value when in a function
Passcode
After being prompted, enter the following passcode by pressing: <UP>, <DOWN>, <UP>, <DOWN>, <ENTER>.
This passcode cannot be changed and must be used whenever prompted.
3
QUICK REFERENCE GUIDE
Safety Notes. Use at least two mounting points per product. Make sure the
Mounting clamps
COLORado Solo Batten 4 QRG Rev. 2