Fora P20 Manual Del Propietário página 18

► Fitting the Cuff Correctly
Step 1
Connect the air plug of the tubing to the air
jack of the monitor.
Step 2
Assemble the cuff as shown on the
right. The smooth surface should be
inside the cuff loop and the metal
D-ring should not touch your skin.
Step 3
Stretch your left (right) arm in front of you
with your palm facing up. Slide and place
the cuff onto your arm with the air tube
and artery mark region (in red) toward
the lower arm.
Wrap and tighten the cuff above your elbow. The red line on the edge
of the cuff should be approximately 0.8 to 1.2 inches (2 to 3 cm)
above your elbow. Align the tube over the main arteries on the inside.
Step 4
Leave a little free space between the arm and the cuff, you should be
able to fit 2 fingers between them. Clothing must not restrict the arm.
Remove all clothing covering or constricting the measurement arm.
18
Pile Side Material
RED LINESHOULD BE AT THE INSID
Sewn Hook Material
INDEX MUST