Taking Measurements - Fora P20 Manual Del Propietário

Taking Measurements

► Taking a Single Measurement
Always apply the pressure cuff before turning on the monitor.
Step 1
Press . All the LCD symbols will appear. Press
" " (numbers from 1 to 4) whose test reading will be stored in
memory. Then the cuff will begin to inflate automatically.
Step 2
The heart symbol "
Step 3
After the measurement, the monitor displays the systolic pressure,
diastolic pressure and pulse rate.
Step 4
Press to switch off. Or it will switch off automatically after left idle
for 3 minutes.
• If you press
• If the pulse rate symbol is shown as "
indicates that the monitor has detected an irregular heart beat.
20
" will flash when a pulse is detected during the inflation.
during measurement, the monitor will be turned off.
NOTE
" instead of "
to select user
" , this