Kit Assembly - Metra 95-7017B Instrucciones De Instalación

Double DIN radio provision
1. Cut a notch in the sub dash on
the plastic supports to allow for
clearance of the climate control in
its new position. (Figures A,B)
2. Attach the (2) panel clips to the
climate control relocation panel.
(Figure C)
3. Attach the climate control to
the climate control relocation
panel with the (2) factory screws
(removed in step 3 in disassembly)
and the provided (2) #8 x 1/2"
Phillips screws and the (2) #10 flat
washers. (Figure C)
4. Install the climate control/
relocation panel assembly into the
pocket location in the dash using
the factory hardware removed in
disassembly. (Figure D)
Continued on next page

Kit Assembly

Left side
(Figure A)
Right side
(Figure B)
95-7017B
(Figure C)
5
(Figure D)