Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Installation instructions for part 95-8906HG
Subaru Legacy, Subaru Outback 2015-up
KIT FEATURES
• Double DIN radio provision
• Painted high gloss black
KIT COMPONENTS
• A) Radio housing trim panel • B) Radio brackets
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • Please visit metraonline.com for harness options
Antenna Adapter: • 40-LX11
METRA. The World's best kits.
95-8906HG
1-800-221-0932
™
Dash Disassembly
– Subaru Legacy 2015-up . ...................................... 2
– Subaru Outback 2015-up . .................................... 2
Kit Assembly
– Double DIN radio provision ................................... 3
TOOLS REQUIRED
• Phillips screwdriver • Panel removal tool
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
metraonline.com
© COPYRIGHT 2015 METRA ELECTRONICS CORPORATION
Table of Contents
Publicidad
Manuales relacionados para Metra 95-8906HG
Resumen de contenidos para Metra 95-8906HG
- Página 1 Installation instructions for part 95-8906HG Table of Contents Subaru Legacy, Subaru Outback 2015-up 95-8906HG Dash Disassembly – Subaru Legacy 2015-up ........2 – Subaru Outback 2015-up ........2 Kit Assembly – Double DIN radio provision ........3 KIT FEATURES • Double DIN radio provision • Painted high gloss black...
-
Página 2: Dash Disassembly
95-8906HG Dash Disassembly 1. Unclip and remove the trim panel from around the climate controls. (Figure A) 2. Remove (2) Phillips screws securing the climate controls then unclip and remove them. (Figure B) 3. Unclip and remove the a/c vents above the factory radio. (Figure C) 4. Remove (4) Phillips screws securing the radio then unclip and (Figure A) (Figure C) remove the radio. (Figure D) 5. Unclip the four plastic panel clips from the factory radio and place them onto the 99-8906 radio trim panel. Continue to kit assembly (Figure B) (Figure D) -
Página 3: Kit Assembly
95-8906HG Kit Assembly Double DIN radio provision 1. Attach the brackets to the radio with the screws included with radio. (Figure A) 2. Locate the factory wiring harness and antenna plug in the dash and make all necessary wire connections to the radio. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 3. Mount the new radio assembly into the dash. 4. Attach the (4) factory panel clips to the 95-8906HG radio trim panel. (Figure A) 5. Reassemble the dash in the reverse order of disassembly using the 95-8906HG radio trim panel. - Página 4 Installation instructions for part 95-8906HG NOWLEDGE IS OWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
-
Página 5: Subaru Legacy, Subaru Outback 2015 Y Mas
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-8906HG Indice Subaru Legacy, Subaru Outback 2015 y mas 95-8906HG Desmontaje del tablero – Subaru Legacy 2015 y mas ........2 – Subaru Outback 2015 y mas ........ 2 Ensamble del kit CaraCterístiCas del kit •... -
Página 6: Desmontaje Del Tablero
95-8906HG Desmontaje del tablero 1. Desenganche y quite el panel de la moldura alrededor de los controles de clima. (Figura A) 2. Quite los (2) tornillos Phillips que sujetan los controles de clima y luego desenganche y quítelos. (Figura B) 3. -
Página 7: Ensamble Del Kit
Metra recomienda que use adaptadores adecuados de acoplamiento de Metra y/o de AXXESS. 3. Monte el nuevo ensamble de radio en el tablero. 4. Coloque los (4) ganchos del panel de fábrica en el panel de la... - Página 8 INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-8906HG EL CONOCIMIENTO ES PODER NOWLEDGE IS OWER Mejore sus habilidades de instalación y fabricación Enhance your installation and fabrication skills by inscribiéndose en la escuela de dispositivos electrónicos enrolling in the most recognized and respected mobile electronics school in our industry.