Descargar
Compartir
Imprimir esta página
  1. Manuales
  2. Marcas
  3. Metra Manuales
  4. Sistema Estéreo para Coches
  5. 95-6523
  6. Manual de instrucciones

Metra 95-6523 Manual De Instrucciones

Ocultar thumbs
1
2
3
4
5
6
7
8

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Descargar este manual
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Radio mounting brackets • D) (4) White plastic panel clips • E) (8) 5mm x 12mm Phillips Screws
A
B
Metra. The World's Best Kits.
®
Ram Promaster
*Visit MetraOnline.com for up-to-date vehicle specific applications.
KIT FEATURES
• ISO DDIN radio provision
• Custom texture
C
MetraOnline.com
2014-up*
D
E
© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
95-6523
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: 70-1784 or XSVI-6523-NAV
Antenna Adapter: 40-VW10 or 40-EU10
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 86-5618 radio removal tool
• 86-3528 radio removal tool
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
REV. 3/16/18 INST95-6523

Publicidad

loading

Manuales relacionados para Metra 95-6523

Resumen de contenidos para Metra 95-6523

  • Página 1 Also, do not remove the factory radio with the key in the on position, or while the vehicle is running. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 3/16/18 INST95-6523...

  • Página 2: Dash Disassembly

    DASH DISASSEMBLY With radio delete or Single DIN factory radio: 1. Using Metra’s 86-5618 radio removal tools pull the factory radio from the dash. (Figure A) 2. Remove (2) Phillips screws in bottom of dash opening. 3. Unclip and remove the factory radio trim panel.

  • Página 3: Kit Assembly

    (2) Phillips screws removed in (Figure D) disassembly. (Figure C) 5. Locate the factory wiring harness in the dash. Metra recommends using the (Figure D) proper mating adapter from Metra or Remove pin AXXESS. Re-connect the negative battery...
  • Página 4 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 3/16/18 INST95-6523...
  • Página 5 Además, no quite el radio de fábrica con la llave en la posición o de encendido ni con el vehículo funcionando. The World’s best kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 3/16/18 INST95-6523...

  • Página 6: Desmontaje Del Tablero

    DESMONTAJE DEL TABLERO Sin radio o con radio de fábrica de DIN sencillo: 1. Usando las herramientas de remoción del radio 86-5618 saque el radio de fábrica del tablero. (Figura A) 2. Quite los (2) tornillos Phillips de abajo de la apertura del tablero.

  • Página 7: Ensamble Del Kit

    (2) tornillos Phillips en los soportes de montaje. (Figura D) retirados al desensamblar. (Figura C) 5. Ubique el arnés de cableado de fábrica en el tablero. Metra recomienda el (Figura D) uso de un adaptador adecuado de Retirar el pasador acoplamiento de Metra o de AXXESS.
  • Página 8 800-354-6782 for more information and take steps www.installerinstitute.com o llame al toward a better tomorrow. 800-354-6782 para obtener más información y avance hacia un futuro mejor. Metra recomienda MECP Técnicos certificados The World’s best kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 3/16/18 INST95-6523...