Valore VS1205 Guía De Instalación Del Usuario página 10

Attention:
PVC cover is not
required if the water
outlet is below 33.38"
Valve goes below this
C
template. Bottom of
panel.
Installation Template Guide
How To Use Template:
1. Connect the brass extender joint provided.
2. Place the installation template in the desired position over the wall with the brass extender joint
positioned going through the cutout on the template. It is recommended that the tallest user in the
house be the determining factor of the desired position. 10" of clearance above the tallest user
is recommended.
3. Once the template is in the desired position, secure the template by using tape or a temporary
adhesive to hold it in place.
4. The template is the exact size of the shower panel. The bottom of the template should be above
your existing shower valve. Recommended that there is a ½" clearance above the valve.
5. If the template does not fit with the clearance provided, you can mount the panel off center and
to the side.
English
INSTALLATION
B
Recommended
10"
A
Installation position will
vary depending on
users height. Depending
on users height, it is
recommended to have
10" of clearance above
your head.
10
4
4
• An installation template guide
is included with your shower
panel as a convenient method
of determining the correct
position of the shower panel.