Care And Maintenance - allen+roth LG-2156-L-E Manual De Instrucciones

3. Insert the woven back panel (D) into the
seat (C).
4. Assemble the woven back panel (D) to
the left arm (B) and right arm (A) by inserting
long bolt (BB) and washer (CC).Check
alignment of all hardware and make
corrections if necessary. Fasten all bolts
tightly with hex wrench (EE).
Cover all bolts with bolt covers (DD).
Hardware Used
Long Bolt (1/4 in. - 20
BB
x 2.165 in. L)
Washer
CC
Bolt Cover
DD
Hex Wrench
EE

CARE AND MAINTENANCE

• Paint on this furniture might peel if it is not handled properly. Handle with care.
• Clean frame with a solution of warm water and mild soap. Dry completely. Do not use bleach
or solvents. Use a fine automotive wax to maintain gloss on non-textured finishes.
• The finish on furniture is formulated and baked on to make it highly resistant to repellents and
lotions. However, to avoid discoloration, clean the frame as soon as possible after exposure.
• For best results, clean weave regularly with mild detergent and warm water. Cleaning will help
prevent mildew by washing out dirt particles that may become trapped. Shake out excess
moisture after rinsing and allow to dry thoroughly before storing.
3
4
DD BB CC
x 2
x 2
A
x 6
x 1
4
Lowes.com/allenandroth
D
C
D
B