Ninja BL740 Guia Del Usuario página 12

Assembly and Use for the 72 oz. Pitcher
WARNING: Never leave the appliance unattended while in use.
CAUTION: Handle the blade assemblies with care, as the blades are very sharp.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY
Fig. 1
1
Place the motor base on a clean, dry, level surface such
as a counter or table top.
2 Align and lower the Pitcher onto the motor base. (Fig. 1)
Handle should be aligned slightly to the right of the
"LOCK" symbol on the motor base.
3
Rotate the blender pitcher clockwise until it clicks in
place. As the pitcher rotates, it will lower and the safety
tabs on the bottom of the pitcher will slide under the
safety tabs on the top of the motor base. (Fig. 2)
4
The pitcher can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 3a, Fig. 3b)
5
Holding the Total Crushing
top of the shaft, place it onto the drive gear inside
the container. Ensure that the attachment is seated
properly and is standing upright. (Fig. 4)
NOTE: The blade will fit loosely on the drive gear.
6 Add the ingredients to the pitcher, making sure that
they do not exceed the highest measured marking line
on the side of the bowl.
11 1-877-646-5288
Fig. 2
It's best to add the liquid ingredients first and then the dry ingredients.
Blade Assembly by the
™
Fig. 3a
Fig. 3b
NOTE: If you need to add additional ingredients while
the appliance is processing, open the pouring spout
cap and pour the ingredients in through the opening.
NOTE: When blending any kind of liquids, such as
mixtures of any drinks or smoothies, do not exceed the
"Max liquid" mark (64 oz.) on the pitcher
7
Plug the power cord into the electrical outlet and press
the power button ( ).
IMPORTANT: As a safety feature, the power
button ( ) will flash and the motor will not work
if the container and lid are not installed correctly.
When the container and lid are installed properly,
the power button ( ) will be solid, indicating that
the appliance is ready for use.
8
Holding the lid by the handle in the upright position,
place it on top of the pitcher aligning the arrow ( )
located on the lid with the arrow ( ) located on the
bowl's handle. (Fig. 5)
Fig. 4
Fig. 5