Kohler K-18597 Guia De Instalacion página 4

7/8" (2.2 cm)
Finished
Wall
34-1/4"
(87 cm)
2. Install the Brackets
Measure and mark 34-1/4" (87 cm) from the floor.
For K-18598 and K-18599:
Using a level, draw a 48" (121.9 cm) horizontal line through the
marked height. This will be the horizontal position where the
vanity will slide onto the brackets.
For K-18597:
Using a level, draw a 24" (61 cm) horizontal line through the
marked height. This will be the horizontal position of the bottom
of the vanity.
For All Installations:
NOTE: The length of each bracket is 5" (12.7 cm).
Mark a point 7/8" (2.2 cm) in from the edge of each end of the
marked line.
Mark a 5" (12.7 cm) plumb line down from the previous marked
point. This will be the plumb line for the outermost edge of each
bracket.
NOTE: The brackets provided have a left and right side. Ensure that
you are aligning the correct bracket before marking its location.
1055673-2-C
Marked Length of
Vanity: 24" (61 cm)
or 48" (121.9 cm)
5" (12.7 cm)
Plumb Line
Finished Wall
5" (12.7 cm)
Verify brackets are
level after mounting.
4 Kohler Co.