Care And Maintenance - Carl Stahl Kromer XBT Traducción De Las Instrucciones De Servicio

EN
2. The rope is hanging loosely out of the
opening and has nearly no tension. The
springs were apparently relieved too
much.
Solution: Please immediately tension the
springs again by turning the adjustment
mechanism back to the rear (opposite
your direction of view).
If this error pattern occurs please take immediate action in accordance with the solutions.
Otherwise the spring can quickly become damaged and the training device could suffer
serious damage. In case of doubt, please feel free to contact your supplier or our service
hotline at any time.
Motion Sequences
 Your movements are not limited in any way while using this machine. You can move
your arms and legs freely, working against resistance at all times. However, you must
maintain good posture. If you feel the spring tension is too high, reduce the resistance
or stop exercising.
 You can execute any functional exercises, martial arts elements, dance, or other chore-
ography you want, depending on your exercise goals.

Care and Maintenance

 Clean the outsides of the two housings as needed. Only use a wet cloth and a mild
cleaning agent to clean the machine. Protect the machine from shocks, falling, dust,
moisture, direct sunlight, and extreme temperatures.
 You should dry the belt after working out. Never store the belt in a closed cabinet / con-
tainer, etc. under any circumstances; instead, ensure that the fabrics can breathe.
 Remove the hand and foot loops from the machine as needed, washing them in the
washing machine at a maximum temperature of 30°.
Operating Instructions
17