Safety Labels - Spyker Spreaders ROS 5 S100-12011 Manual Del Operador

Safety Labels

HOPPER
SHUT-OFF
CAUTION
OPEN
Serious bodily injury may
result from failure to follow
safe operator procedure.
• Read the operator's manual before
operating this machine.
• Clear area of debris.
• Do not remove or disable shields, guards,
or safety devices.
• Always chock the wheel or engage the
parking brake when transporting the
machine or when parking on a grade.
• Stop engine, disconnect spark plug, set
parking brake before adjusting or servicing.
• Keep people and pets a safe distance away
from machine.
• Do not add fuel while engine is warm or
running.
• Use caution on slopes.
• Before leaving the operator's position, wait
for all movement to stop.
• Do not allow operation of the machine by
untrained personel.
FOR FIRST-TIME OPERATORS
CLOSED
• START OFF IN A FLAT, OPEN AREA.
• KEEP BYSTANDERS AWAY
• SET THROTTLE AT A LOW SPEED.
• PRACTICE MANEUVERING,
(FORWARD, REVERSE, LEFT, RIGHT)
CAUTION
Serious bodily injury may result from
failure to follow safe operator procedure.
• Read the operator's manual before operating
this machine.
• Clear area of debris.
• Do not remove or disable shields, guards or
safety devices.
• Always chock the wheels or engage the
parking brake when
machine or when parking on a grade.
• Stop engine, disconnect spark plug, set
parking brake before adjusting or servicing.
• Keep people and pets a safe distance away
from machine.
• Do not add fuel while engine is warm or
running.
• Use caution on slopes.
• Before leaving the operator's position, wait
for all movement to stop.
• Do not allow operation of the machine by
untrained personnel.
FOR FIRST-TIME OPERATORS
• Start off in a flat, open area.
• Keep bystanders away.
• Set throttle at a low speed.
• Practice maneuvering.
(Forward, Reverse, Left & Right).
©2016 Spyker Spreaders/A Brinly-Hardy Co.
SIDE ACCUWAY ®
DEFLECTOR
SPREAD CALIBRATION
DOWN OFF
OFF
UP
1009018 (Not to scale)
transporting the
ATENCIÓN
Para evitar sufrir lesiones, respete
el procedimiento de inicio:
1. Coloque el freno de mano.
2. Mueva la palanca libre de la rueda a
BYPASS (Derivación).
3. Asegúrese de que las palancas de
control de velocidad sobre el suelo
estén en punto muerto.
4. Coloque el interruptor del motor en ON
(Encendido).
5. Arranque el motor.
To Avoid Injury, Follow Start
1. Engage Parking Brake.
2. Move Free Wheel Lever to BYPASS.
3. Ensure Ground Speed Control Levers
are in neutral.
4. Turn ON Engine Switch.
5. Start Engine.
CAUTION
To Avoid Injury, Follow Start Procedure:
1. Engage Parking Brake.
2. Move Free Wheel Lever to BYPASS.
3. Ensure Ground Speed Control Levers are
in neutral.
4. Turn ON Engine Switch.
5. Start Engine.
3
CAUTION
Procedure:
1009121
1009121 (Not to scale)
1017459 Rev. C