RCA ANT800 Guia Del Usuario página 3

Mounting to a Surface
Mounting base
1. Orient the antenna base.
Make sure the base is oriented correctly for
the direction you want to point the antenna.
Use the illustration on the left as a guide.
Mounting
Well
2. Mount the base to the surface.
Find the four wood screws included in this
Wood
package. Using these screws, attach the
screw
base to the surface as shown here.
3. Attach the arm to the base.
Find one of the screws, washers, and nuts
included in the package.
First, set the washer and nut in the
mounting well. Then position the arm over
the other side of the well. Attach the arm to
the base as shown here.
4. Attach the antenna to the arm.
Find the other screw, washer, and nut.
First, set the washer and nut in the
antenna's mounting well. Then position the
arm over the other side of the well. Attach
the arm to the antenna as shown here.
continues on next page...
3