RCA ANT800 Guia Del Usuario página 6

6
5. Attach the antenna to the arm.
Find the other screw, washer, and nut.
First, set the washer and nut in the
antenna's mounting well. Then position the
arm over the other side of the well. Attach
the arm to the antenna as shown here.
6. Position and orient the antenna.
Loosen the screws between the arm and
the base or antenna just enough so that you
can position and orient the antenna the way
you want.
You can also adjust the antenna's
orientation on the antenna itself. On the
antenna's underside, next to the arm, there
are two screws. Loosen these just enough
so that you can rotate the antenna on the
arm. Once you've found the orientation you
want, tighten these screws.
7. Tighten all screws. Attach the screw covers.
8. Skip to the "Connecting to Your TV"
section to complete installation.