First Steps; First Setup; Wheels - Mima xari Manual Del Usuario

EN

FIRST STEPS

FIRST SETUP

1. Unfold chassis
Pull up the handlebar while holding down the tip of the
chassis with your foot.
Continue to pull the handlebar towards you until the
chassis completely unfolds and stands by itself.
1

WHEELS

• Please note the L/R indication on the chassis and on
each wheel.
2. Attach rear wheels
Press in the wheel axle hub and insert the axle into the
wheel fitting.
Check if the wheels are properly attached by attempting
to pull them out again.
3. Remove rear wheels
Press in the wheel axle hub and pull out the wheel.
2 + 3 4 + 5
4. Attach front wheels
Insert the wheel rod into the wheel fitting and push in
until it clicks.
5. Front wheel swivel lock
Use the front wheel swivel lock when you are using xari
on rough terrain.
Push down the swivel lock button to activate.
Pull it up again to deactivate.
6. Remove front wheels
Slide the unlock button sideways and pull out the front
6 wheel.
5