Amplifier Wiring; Power Connections; Speaker Connections Xtr2504 And Xtr5004 - Directed Electronics ORION XTR2504 Manual Del Propietário

AMPLIFIeR WIRInG

Power Connections

• Power connections accept up to 4 AWG wire .
• 4 AWG power and ground wire recommended for optimal per-
formance .
• Connect 12V+ to the battery through a fuse holder . this connec-
tion provides +12V main power to the amplifier .
• Power wire must be fused no more than 12" from battery .
• Ground amplifier to a good chassis ground as close as possible to
the amplifier .
• Recommended fuses are 50A for the XtR2504, and 100A for the
XtR5004 .
• Connect ReM terminal to remote turn-on lead from source unit .
this connection provides +12V power to turn-on the amplifier .
• Add extra ground wire between the negative terminal of the
battery and the chassis .
NOTE: the addition of a ground wire from the battery to the chassis
of the vehicle improves the ability of the battery to supply power to
the amplifier . this is recommended because the current delivery of the
factory electrical system was designed only to accommodate electron-
ics supplied by the auto manufacturer .
© 2008 Directed Electronics. All rights reserved.
1CH
2CH
+
_
_
+ +
1CH
2CH
+
_ _
_
+
1CH
2CH
+
_
3CH

Speaker Connections XTR2504 and XTR5004

4CH
+
the orion amplifier offers four positive and four negative output
_
terminals for ease of connecting channel 1, 2, 3, and 4 outputs to
the speakers . the amplifier is stable to 2Ω per channel . see diagrams
below for possible configurations .
two Channel Bridged Configuration
+
_
3CH
_
4CH
+
Figure 9
Figura 9
Abbildung 9
_
+
3CH
4CH
+
_
_ _
+
1CH 3CH
2CH 4CH
+ +
_
9