Astralpool StarLight Manual Del Usuario página 3

The operation instructions of production charging:
Charge the battery of the lamp completely by positioning it on the charge plate for at least 6 hours.
Plug the charger directly into the power socket for charging
- In charging: A red color light on the plate indicates that the lamp is being charged
- End of the charging: When the indicator light turns green, it means the battery is full charged
This product matching with adaptor input voltage AC100~240V, for global common plug, which can be assured to
be used.
Working time: 10- 12Hrs
Products Guidance Notes:
LED light will enter into power saving mode automatically when not used in 24 hours, and the Remote Control will
not function correspondingly. To restart for using again, please press the button placed on the bottom of the light
and then, the Remote Control functions recovered.
The indicator lighter will be green while charging if power used up, which is normal.
In order to extend the service life of internally installed battery, please recharge in time when it is low power, and
long time inactivity inadvisable.
Accessories include Remote Control, Adaptor and Charging Plate. These are non-waterproof. So please do not
use them outdoors or expose it to rain, moisture or other liquids.
Never use the products near a heat source and keep it out of reach from the children.
The charger is only to be used with this lamp and no attempts should be made to open it or service it to another
product
-2-
ENGLISH