Sterling 2375 Serie Guia De Instalacion página 18

Strike Side
Bulb
Seal
Jamb
Seal
Plug
19. Install the Jamb Seals, Plugs and Bottom Pin
Install the Jamb Seals
NOTE: Both the pivot jamb and strike jamb receive a jamb seal.
Position the jamb seal alongside a wall jamb.
Push the end of the jamb seal into the jamb and push the front of the jamb seal into the opening on
the jamb.
Install the Plugs and Bottom Pin
For right pivot installations: Insert a plug into the left side hole of the top and bottom bridge
members. Place a plastic washer on the right side bottom hole in the bridge member.
For left pivot installations: Insert a plug into the right side hole of the top and bottom bridge
members. Place a plastic washer on the left side bottom hole in the bridge member.
Insert the bottom pin into the plastic washer in the bottom bridge member with the longer end of
the pivot pin down.
1100676-2-C
Pivot Side
Jamb
Seal
Top Pivot Pin
18
Bottom Pivot Pin
Plug
Plastic Washer
Bottom
Pivot Pin
Plastic Washer
Sterling