JB Systems u-Quantum Laser Manual De Instrucciones página 6

ENGLISH

Depending on the classification, operating a laser product can produce laser radiation
that may cause permanent eye damage and/or skin damage. The legal instructions for
using a laser product vary from country to country. The user must always inform himself
on the legal instructions valid in his country and apply them to his situation.

The parent document and cornerstone of laser safety standards ANSI Z136.1 (2007)
provides guidance for the safe use of lasers and laser systems by defining control
measures for each of the four laser classes. This valuable document can be obtained
from www.laserinstitute.org
Please note that JB SYSTEMS cannot be made liable for damages caused by incorrect
installations and unskilled operation!
DESCRIPTION:
1. MODE button: Use this button to select one of the 4 modes:
 Fast automatic mode (LED is red)
 Slow automatic mode (LED is red)
 Sound activated (LED is blue)
 Sound strobe effect (LED is blue)
Press this button for about 2.5 seconds to turn off the fixture.
2. INTERNAL MICROPHONE: The built-in microphone is used to synchronize the laser
show to the beat of the music. You can set the sensitivity of the microphone via the
wireless remote control.
3. IR RECEIVER: used to control the unit by the wireless remote control.
4. LED INDICATOR: shows you if the laser is in automatic mode (LED is red) or in sound
activated mode (LED is blue).
5. LASER DIMMER: here you can set the intensity of one of the lasers if you would like to
change the balance between the red and the two colors.
6. MAINS INPUT: DC12V input. Connect the supplied mains adapter here.
7. COOLING FAN: used to cool the components inside the enclosure. Make sure to
never cover this fan outlet!
JB SYSTEMS
®
4/36
USER MANUAL
µ-LASER