Bluetooth Connection - Ltc Audio ATM 7000USB-BT Manual Del Usuario

MIC1 & MIC2: Connect your microphones here
Input: Press this button to switch among all the inputs.
Play/Pause: Press this button to play the signal from USB/SD, Bluetooth. Press again to pause
AM/FM Selector: Press this button to select the input between AM & FM.
REPEAT/RANDOM: Press this button to switch the repeat modes.
Previous: Press this button to go back to the beginning of the current track or move to the previous track or move
to previous station.
Next: Press this button to move to the next track or move to next station.
Master Volume: Use this knob to control the master volume.
OPERATION
Select a central location for the amplifier.
Connect the speaker wires (red & black) to the + and – terminals on the rear panel of the amplifier.
Connect the audio signal to the relevant sockets with the correct polarity.
Plug the mains lead in and switch the amplifier on once you have checked all connections.
Switch the audio sources on and adjust the master volume to the required level.
Karaoke: Plug a mic into MIC1 or MIC2 socket on the front panel. Before you use the mic, make sure that it is
switched off and the MIC volume button is set to the minimum. Connect the microphone, switch it on and adjust
slowly the volume and the echo.
If you don't use the unit any longer, switch the amplifier off and disconnect it from the mains.
Signal Sources and their Connections:
• Connect a DVD-player or a CD-player to the terminal AUDIO INPUT or a data storage unit to the USB-interface
or insert a SD-memory card in the suitable slot or activate the Bluetooth function on your smartphone.
• Select the active signal source by pressing the INPUT button until the desired input source is displayed.
• Use the MP3 CONTROL-function for controlling the files on a connected data storage unit.
• If you wish to use the karaoke function of this device, insert one or two microphones into MIC1 and MIC2. Their
signals are going to the signal output too.

Bluetooth Connection

The ATM7000USB-BT is only discoverable when the input selected is Bluetooth. After selecting Bluetooth input
mode on the ATM7000USB-BT, turn on the Bluetooth function on the cell phone and search the ATM7000USB-BT.
Its Bluetooth device name is "ATM7000USB-BT". Pair and connect after search. There is no pairing code.
Rear Panel:
Power supply: Connect the unit to the AC power outlet.
Speakers Outputs: Connect your speakers here to receive the signal from the ATM7000BT