Denon DVD-2200 Instrucciones De Operación página 18

ENGLISH
TEST TONE
• Use the 0 and 1 cursor buttons to select auto or
manual.
Adjust so that the volume of the test tones output
from the different speakers sounds the same.
• The volume level output from the front speakers
(left and right channels), center speaker, surround
speakers (left and right channels) and subwoofer can
be adjusted.
• The volume level can be adjusted between 0 and -10
dB in steps of 1 dB.
Press the RETURN button to return to the
"SPEAKER SETUP" menu.
B When "DELAY TIME" is selected
With 5.1-channel surround sound, ideally the distance
between the listening position and all the speakers
aside from the subwoofer should be the same. The
delay time setting can be used to make the sound
from the different speakers reach the listening position
at the same time.
Use the • and ª cursor buttons to select the setting
item, then press the ENTER button.
3
• When "DISTANCE" is selected:
METERS (when the cursor button is pressed):
0
The unit of distance is set to meters ("m").
FEET (when the 1 cursor button is pressed):
The unit of distance is set to feet ("ft").
• When "FRONT Lch", "FRONT Rch", "CENTER",
"SURROUND Lch", "SURROUND Rch",
"SUBWOOFER" is selected:
Use the 0 and 1 cursor buttons to set the distance
from the listening position to the different speakers.
The distance can be set within the range of 0 to
18 meters (60 feet).
The maximum difference in speaker distance for
which adjustment is possible is 4.5 meters (15 feet).
The delay time setting is not valid when playing
Super audio CDs.
• When "DEFAULT" is selected:
When "DEFAULT" is selected and the ENTER button
is pressed, all the items are restored to their factory
default settings.
When digital connections are made with an AV amplifier,
make the speaker settings on the AV amplifier.
For DVD audio discs, the disc's settings are given
priority, so the sound may not be produced as set with
the above speaker mode setting.
Press the RETURN button to return to the "SPEAKER
SETUP" menu.
18
ENTER
Remote control unit Remote control unit
SPEAKER SETUP
DE L AY T I ME
METERS
D I STANC E
F RONT L c h 3.6m
3.6m
F RONT R ch
CENT ER 3.6m
SURROUND L c h 3.0m
SURROUND Rc h 3.0m
SUBWOOF ER 3.6m
DE F AUL T ON
3
SE L EC T : DEC I S I ON : ENTER BUT TON
ENTER
Remote control unit
SPEAKER SETUP
DE L AY T I ME
D I STANCE METERS
F RONT L c h 3.6m
F RONT Rc h 3.6m
CENT ER 3.6m
SURROUND L ch 3.0m
SURROUND Rc h 3.0m
SUBWOOF ER 3.6m
DE F AUL T ON
SE L EC T : DEC I S I ON : ENTER BUT TON
SPEAKER SETUP
DE L AY T I ME
D I STANCE METERS
F RONT L c h 3.6m
F RONT Rc h 3.6m
CENT ER 3.6m
SURROUND L ch 3.0m
SURROUND Rc h 3.0m
SUBWOOF ER 3.6m
DE F AUL T ON
SE L EC T : DEC I S I ON : ENTER BUT TON
To exit the setup mode
Use the ª cursor button to select "EXIT SETUP", then press the ENTER button. It is also possible to quit
by pressing the SETUP button on the remote control unit.
w When "SUPER AUDIO CD" is selected:
MULTI (Factory default)
When playing Super audio CDs, the multi-channel area is
played with priority.
STEREO
When playing Super audio CDs, the stereo area is played
with priority.
CD
When playing Super audio CDs, the CD layer is played with
priority.
When playing discs that do not contain the selected
area/layer, another layer/area is played automatically.
e When "DIGITAL OUT" is selected:
NORMAL (Factory default)
When playing DVDs recorded in Dolby Digital or DTS,
bitstream signals are output from the digital audio output
terminals. When playing DVDs recorded in linear PCM or
packed PCM, linear PCM signals are output.
Select "NORMAL" when making digital connections to
an AV amplifier with built-in Dolby Digital and DTS decoder.
PCM
When playing Dolby Digital/DTS bitstream signals or DVDs
recorded in linear PCM or packed PCM, the signals are
converted into 48 kHz/16-bit PCM (2-channel) signals and
output from the digital outputs. When playing DVDs
recorded in PCM, linear PCM signals are output.
r When "LPCM (44.1 kHz / 48 kHz)" is selected:
OFF (Factory default)
When playing linear PCM or packed PCM DVDs that are
not copyright-protected, for 2-channel PCM audio signals
up to 96 kHz, linear PCM signals are output as such
without being converted from the digital outputs. (176.2
kHz and 192 kHz signals are converted to 88.2 kHz and
96 kHz, respectively.)
PCM signals of 48 kHz/16 bits and lower are output,
regardless of whether they are copyright-protected or not.
For DVDs containing multi-channel PCM signals, the digital
signals are down-mixed for output into two channels, front
left and right. (Only the front left and right channels are
output for sources for which down-mixing is prohibited.)
When playing copyright-protected linear PCM or packed
PCM DVDs, in consideration of copyrights, no digital
signals are output for sources exceeding 48 kHz/16 bits.
When playing such sources, either set to "ON" or make
analog connections. (See page 9.)
ON
Linear PCM and packed PCM signals are converted to
44.1 kHz or 48 kHz and output. (The PCM digital audio
output signals are converted to 48 kHz or less in
consideration of copyrights.) When making digital
connections to an AV amplifier that is not compatible with
96 kHz/88.2 kHz signals, set to "ON".
t When "BASS ENHANCER (2 CHANNEL)" is selected:
OFF (Factory default)
No sound is produced from the subwoofer.
ON
Sound is produced from the subwoofer.
In this case, set the subwoofer to "YES" at the speaker
settings.
AUD I O SE TUP
AUD I O CHANNE L
SUPE R AUD I O CD MUL T I
D I G I TAL OUT ST EREO
L PCM (4 4 .1 kHz / 4 8 kH z) CD
BASS ENHANCER(2 CHANNEL)
E X I T SE TUP
SE L ECT : DEC I S I ON : ENTER BUT TON
ENTER
Remote control unit Remote control unit
AUD I O SE TUP
AUD I O CHANNE L
SUPE R AUD I O CD
D I G I TAL OUT NORMAL
L PCM (4 4 .1 kH z / 4 8 kH z) PCM
BASS ENHANCER(2 CHANNEL)
E X I T SE TUP
SE L ECT : DEC I S I ON : ENTER BUT TON
AUD I O SE TUP
AUD I O CHANNE L
SUPE R AUD I O CD
D I G I TAL OUT
L PCM (4 4 .1 kH z / 4 8 kH z)
OF F
BASS ENHANCER(2 CHANNEL) ON
E X I T SE TUP
SE L ECT : DEC I S I ON : ENTER BUT TON
AUD I O SE TUP
AUD I O CHANNE L
SUPE R AUD I O CD
D I G I TAL OUT
L PCM (4 4 .1 kH z / 4 8 kH z)
BASS ENHANCER(2 CHANNEL) OF F
ON
E X I T SE TUP
SE L ECT : DEC I S I ON : ENTER BUT TON