Amica 10143.4TfDbJVQaS Manual De Uso página 56

OPERATION
COOK TIME changes to END TIME in box
2. Entered cook time, for example 0:30,
changes to the actual end time, while the
remaining time is displayed on the red bar
below the actual end time
symbol is displayed continuously. Once
cook time has elapsed, an acoustic signal
is sounded (2 beeps / pause / 2 beeps). The
sequence is repeated every 3 seconds for
about a minute,
Touch to acknowledge and mute the aco-
ustic signal. After this, the appliance switches
to standby mode.
Important. Once the cook time has elapsed
you can extend it. Touch
and set the additional time using navigation
sensor fields.
.Setting Cook Time and End Time (for a
heating function)
For details on how to set Cook Time, please
refer to the preceding paragraph.
Setting End Time.
When is displayed continuously, touch
sensor field again. While
es to be displayed,
and End Time is shown on the display.
.
symbol is flashing.
instead of
symbol continu-
,symbols starts flashing
If no change in setting is made within 5 se-
conds, the appliance will return to previous
settings of cook time and the selected heating
function. Touch
to set cook time in 1 minute steps.
Cook time is stored after 5 seconds or after
touching sensor field.
COOK TIME changes to START TIME in box
2. Entered cook time changes to the actual
start time, while the time remaining to start
time is displayed on the red bar below the
actual start time
tinuously, while
If no changes are made within 60 seconds,
the appliance enters standby mode. When
any sensor field is touched, the appliance is
activated and the display shows last settings.
Appliance operation in selected mode
When the current time is reaches start time,
the appliance will start the selected heating
function. START TIME changes to END TIME
in box 2. The display shows end time and the
time remaining to end time is displayed on
the red bar below the actual end time. When
cook time countdown begins the
is extinguished and
56
navigation sensor fields
, symbol is displayed con-
symbol is extinguished.
, symbol
symbol illuminates.