PLYMOVENT MOBILEONE Instrucciones Para El Uso página 7

the mobile"one"
1. mount the flange(a) to the filter cabinet and the rubber collar (b)
on the inner arm.
then mount the arm on the filter.
nOTE! place the Washer (e) betWeen flange and arm.
3. adjust all friction joints to correct tension.
051113/0 MobileOne
mounting instruction
economy-arm
© copyright 2008: all rights reserved. all information within this printed matter may not be reproduced,
handed over, copied, xeroxed or translated into another language in any form or means without written
permission from plymovent ab. plymovent ab reserves the right to make design changes.
e
2. fit hose, hose clips, hood collar and hood to
outer arm.
4. fit hose and hose clamps.
b
a
M1/6/14
EN - 6