Dash Disassembly - Metra 95-6524B Instrucciones De Instalación

1. Remove ashtray and remove one
Phillips screw exposed. (Figure A)
2. Unclip and remove radio/climate
control trim panel.
3. Remove (4) Phillips screws
securing radio. Disconnect and
remove radio.
4. Remove the factory climate
controls.
5. Unclip and remove the 12-volt
power plug.
6. Remove the factory panel clips and
save for kit assembly.
7. Cut and remove the factory radio
shelf (shaded area) from the
sub-dash to make room for the
aftermarket DDIN radio. (Figure B)
Continue to kit assembly

Dash Disassembly

2 3
1 4
POWER
OUTLET
(Figure A)
95-6524B
Remove this area
(Figure B)
2