Switching Rds Information Display; Registering Station Names - Denon TU-1500AE Instrucciones De Operación

ENGLISH
Operation
ON/STANDBY

Switching RDS information display

1 Use the procedure described at "Auto tuning",
"Recalling preset stations" or "RDS search" to
tune in a frequency with an RDS station.
DISPLAY
2
Press the
reception information.
The display switches as shown below each time the
DISPLAY button is pressed.
q STATION NAME :
Only displayed when the search mode is set to
PRESET and the station name has been registered.
w PS :
The programme service name and frequency of the
station tuned in is displayed.
The above is an example for when there is TP
data but no RT data.
e PTY :
The programme type of the tuned in broadcast is
displayed.
r CT :
The current time is displayed.
DIMMER MENU
BAND TUNING/PRESET
button to switch the RDS
MEMORY
DISPLAY
PRESET
• When the "STATION NAME" is not registered, q is not
displayed.

Registering station names

1
Select the station whose name you want to set.
Example: To register "DENON" as the FM station
name at preset channel "A2".
2
MENU
Press the
3
TUNING/PRESET
Turn the
"Station name".
4
TUNING/PRESET
Press the
• The station name input mode is set.
5
Either turn the
PRESET
press the
15
ENGLISH
POWER
button.
knob to select
knob.
TUNING/PRESET
knob or
button and select "D".