Publicidad
Idiomas disponibles
Idiomas disponibles
2.- The profile closest to the base must lifted using a forklift truck or another TORO tower,
pushing it up from underneath to unblock the safety brake and then completely lower the
profile. If the safety brake stays blocked when this has been done, it must be unblocked
using the MSU lever system; lift up each profile and then use the lever to unblock them.
3.- Continue to lower the tower, profile by profile in the same way.
AFTER EACH USE
1.- Completely lower the fork carriage and remove any adaptors.
2.- Ensure the forks are in the storage position (vertical position).
3.- Fold the side stabiliser legs. To fold the side stabiliser legs into the vertical folded
position, press the levers at the back of the tower, see the picture. NOTE: If the legs won't
fold, adjust the front legs with the adjustable wheels until they can be folded.
4.- Remove the front legs and store them in the back sockets in the wheels up position as
per the picture.
IMPORTANT: Replace the profile safety hook to stop the profiles from moving during
horizontal transportation.
5.- Select a safe storage location making sure it is: on a firm and level surface, protected
from the elements, clear of obstructions and passage.
www.guil.es - GUIL
-
-
loading space and chains or straps used are sufficient to withstand the weight of the tower.
T The tower must be secured to the vehicle with straps or slings of adequate load capacity.
T Place the TORO tower against the vehicle. Use the transportation wheels to help load the
tower onto the vehicle.
T The front legs can be inserted in the back of the tower base to manoeuvre it up ramps.
MAINTENANCE
T The TORO lifting tower is released from the warehouse already greased and ready to
use. It is recommended that you periodically (depending on the frequency it is used)
grease the mast profiles and internal pulleys. VERY IMPORTANT: Do not grease the
brake mechanism. Do not allow oil or grease on the braking surfaces.
T A regular technical inspection of the TORO tower must be carried out (depending on the
regulations in your country and the frequency of use of the tower) by a
authorised technician, to establish the condition of all its parts.
®
T Your
tower is made with high quality long-lasting components. In the event of
GUIL
having to change a component it is important that it is replaced with an original spare
®
part.
will not take responsibility for any direct or indirect consequence due to the
GUIL
incorrect use, carelessness or bad maintenance. The guarantee will be invalid if non-
original components are used or if any modifications are made to the tower.
T Do not replace parts of the tower that are critical to stability or structure with items of
different strength or specification. If it were necessary to replace parts, please contact
your dealer or the manufacturer
GUIL
TRANSPORT
T The transport vehicle must be parked on
a level surface. It must be stationary to
prevent it from moving whilst loading the
TORO tower.
T Make
sure
the
vehicle
capacity,
®
.
www.guil.es - GUIL
the
®
GUIL
12
-
-
Publicidad
