Torque Specifications - Superwinch SAC1000 Manual Del Propietário

E L E C T R I C A L S C H E M AT I C

TORQUE SPECIFICATIONS

Drum
Support
Plate
Screws
TORQUE SPECIFICATIONS
Drum Support
Plate Screws
Hawse
(Roller Fairlead) Screws
Base Screws
your winch and void your warranty.
BLK (BRN)
L (L1)
7A
(3A)
120V (240V)
50 / 60 Hz
WHT
WHT
(BLU)
BLU
N (L2)
ORA
#27 #27
Hawse
#32
#32
(Roller Fairlead)
Screws
Base Screws
40-45 lb in
40-45 lb in
90-100 lb in
Over torquing
could damage
RED
SWITCHES SHOWN IN
OFF POSITION
CABLE IN
MOTOR
CABLE OUT
Motor Screws
Note: The hawse or roller fairlead frame
holds the tension plate in place, and conse-
quentially is under tension.
To remove a hawse or roller fairlead frame,
the wire rope must be removed to release
tension. The (#32) two lower screws must be
removed prior to the upper (#27) two screws.
To install a hawse or roller fairlead frame,
the upper (#27) two screws must be inserted
and tightened prior to the lower (#32) two
screws. Reattach the wire rope after installation.
WHT
BLK
GRN
(GRN/YEL)
11