Product Specifi Cations - Twin Star 75089/23MM9065-NB75 Manual De Instrucciones

IMPORTANT INFORMATION
22. Avoid the use of an extension cord because the extension cord may overheat and cause risk of fi re.
However, if you have to use an extension cord, the cord must be No.14 AWG minimum size and rated
not less than 1875 watts. The extension cord must be a three-wire cord with grounding type plug and
cord connection. The extension cord shall not be more than 20 ft. (6 m) in length.
23. See directions in Figure 1. This heater is for use on 120 volts. The cord has a plug as shown in
figure 1. See Figure 1 for grounding instruction. An adapter as shown at C is available for
connecting three-blade grounding type plugs to two-slot receptacles. The green grounding plug
extending from the adapter must be connected to a permanet ground such as a properly
gounnded outlet box. The adapter should not be used if a three-slot grounded receptacle is
available.
Grounding Pin
Grounding
Means
PRODUCT SPECIFICATIONS
VOLTAGE
AMPS (with heater)
AMPS (without heater)
WATTS (with heater)
WATTS (without heater)
Metal
Screws
A B
C D
Fig. 1
120 V, 60 Hz
11.7 Amps
< 0.1 Amps
1400 Watts
< 10 Watts
SAVE THESE
INSTRUCTIONS
3