Twin Star 75089/23MM9065-NB75 Manual De Instrucciones página 8

2. Locate the Center Left Side Panel (B), Center Right
Side Panel (C), Center Front Panel (K) and set out
face down on a scratch-free surface.
Insert Wood Dowel (CC) and Screw (A-1) into the
holes in the front panels, make sure to tighten (A-1).
Push Center Left Side Panel (B) and Center Right
Side Panel (C) snug to the Center Front Panel (K).
Use a Phillips head screwdriver to tighten (A-2).
Hardware Used
Camlock
AA
(A-1,A-2)
Wood Dowel
CC
3. Insert Wood Dowel (CC) and screw (A-1) into the
pre-drille holes in the completed assembly from step
2, make sure to tighten (A-1). Push Center Shelf (D)
snug to the completed assembly from step 2. Use a
Phillips head screwdriver to tighten (A-2).
Hardware Used
Camlock
AA
(A-1,A-2)
Wood Dowel
CC
4. Insert Wood Dowel (CC) and screw (A-1) into the
pre-drilled holes of Center Shelf, make sure to
tighten (A-1). Push Left Side Panel (E) and Right
Side Panel (F) snug to the completed assembly from
step 3. Use a Phillips head screwdriver to tighten
(A-2).
Insert Wood Dowel (CC) and screw (A-1) into the
pre-drilled holes of Middle Support Panel (Q), make
sure to tighten (A-1). Push Center Block (R) snug to
the Middle Support Panel (Q). tighten Screw (BB)
through the pre-drilled holes.
Hardware Used
Camlock
AA
(A-1,A-2)
Screw
BB
Wood Dowel
CC
Fig. 2
x 2
x 2
Fig. 3
x 5
x 8
Fig. 4
x 5
x 2
x 7
7
K
C
CC
A-2
D
A-2
Q
CC
R
E
BB
B
A-1
CC
A-1
A-1
CC
A-2
F