Lenco DVT-1541 Manual De Operación página 19

TV Function
When the VGA signal is connected to the unit, the Advanced setup menu is as shown below:
Press the ▲▼ button to select the desired item
and press the ENTER button to enter it's setup
menu. Press the MENU button to return to the
previous menu.
Auto Adjust:
If the monitor is not clear, you should carry out Auto Adjust.
Press the ▲▼ button to select Auto Adjust and press the ENTER button to enter it's menu. Press
the ▲▼ button to select Yes to activate this function or No to cancel. Press the MENU button to
return to the previous menu.
Image Pos:
Press the ▲▼ button to select Image Pos and press the ENTER button to enter it's menu. Within
the menu, press the ▲▼◄► button to move the image. Press the "MENU" button to return to the
previous menu.
Phase:
Press the ▲▼ button to select Phase and press the ◄► button to adjust the value. Press the
MENU button to return to the previous menu.
Clock:
Press the ▲▼ button to select Clock and press the ENTER button to enter it's menu. Press the
◄► button to adjust the value. Press the MENU button to return to the previous menu.
Auto Color:
Press the ▲▼ button to select Auto Color and press the ENTER button to activate this function.
Press the MENU button to return to the previous menu.
sRGB:
Press the ▲▼ button to select sRGB and press the ENTER button to enter it's menu. Press the
▲▼ button to select "On" to activate this function or "Off" to cancel. Press the MENU button to
return to the previous menu.
- 18 -