Channel Search - Lenco DVT-1541 Manual De Operación

DVB-T Setup

Channel Search

Press the button to select Channel Search, press the ENTER button to enter the Time Setting
menu, the screen will display as below:
1. Search Type
Select Search Type and press the
to select Auto Scan or Manual Scan and press the ENTER button to confirm.
2. Channel No
Select Channel No and use the number buttons to enter the channel number. Press the
direction buttons to remove the incorrect input. Press the ENTER button to confirm.
Note: this item is only available when "Search Type" is set to "Manual Scan".
3. BandWidth
Select BandWidth and press the
to select the proper one and press the ENTER button to confirm.
4. Encrypted
Select Encrypted and press the
select the proper one and press the ENTER button to confirm.
5. Update Mode
Select Update Mode and press the
buttons to select the desired item and press the ENTER button to confirm.
6. Start Search
After setting the items above, use the
press the ENTER button to start searching. During searching, press the SETUP button to stop
searching and return.
In the menu, press the
select the desired item.
Press the SETUP button to return to the
previous menu.
Press the SLOW/EXIT button to exit.
direction button to enter. Press the
direction button to enter. Press the
direction button to enter. Press the
direction button to enter. Press the
direction buttons to highlight the Start Search, and
- 32 -
direction buttons to
direction buttons
direction buttons
direction buttons to
direction