En Declaration Of Conformity - KREA Swiss volumeSPRAY Manual De Instrucciones

GUARANTEE
The spray gun is guaranteed for six months, subject to the enclosed terms and on
condition that it is only used for processing products approved for the food
industry.
The spray gun is designed to work and rest intermittently and it is not suitable for
industrial use, defined as more than three minutes of operation within any 8-minute
period. A maximum of 700 ml of material may be sprayed within a 3-minute period
after which a 5-minute total resting (cooling) period is required before the sprayer
may be used again. Should the spray gun be intermittently used, for periods of 20 -
30 seconds at a time, then a resting (cooling) period of 5 - 10 seconds is sufficient.
Failure to adhere to the usage & resting (cooling) period will significantly reduce the
lifetime of the sprayer and negate the warranty.
Only original spare parts may be used in the event of repairs.
The spray gun must be serviced and cleaned as described in the operating
instructions.
The guarantee starts upon customer receipt. The guarantee excludes any damage
due to natural wear, overloading or incorrect handling.
REPAIRS & PRODUCT LIABILITY
Repairs are not covered by the guarantee and shall be performed by service centres
subject to the applicable price and delivery terms of the country in question.
No liability is accepted for damage caused directly or indirectly by the use and
spraying of this products. The user assumes full responsibility for the use of the
product in accordance with the laws of food hygiene and other legal regulations.

EN DECLARATION OF CONFORMITY

This product meets the required standards as set out in the following norms:
EN 60335-1:2012 + AC:2014 + A11:2014
All relevant plastic components coming into contact with sprayed material consist of
food grade materials.
Dr. Kendrick
Managing Director
7