Installing The Switch On A Table Or Shelf - Nortel Networks Business Policy Switch 2000 Instrucciones Para La Instalación

Installing the switch on a table or shelf

You can install a single Business Policy Switch on any flat surface that can safely support the
weight of the switch and attached cables (15 to 20 pounds or 7 to 9 kilograms).
1
Attach the rubber feet at the marked
locations.
Caution: Do not set a BayStack 10 Power Supply Unit on top of a Business Policy
Switch. The BayStack 10 Power Supply weighs approximately 100 pounds (45 kg), and
the switch housing is not strong enough to support this weight.
9768FA
2
Set the switch on a table or shelf.
Allow at least 2 inches (5.1 cm) on each
side for proper ventilation and at lease 5
inches (12.7 cm) at the back for power
cord clearance.
Business Policy Switch 2000
9
9769FA