Description Of Ps Barcode System Components; Technical Data - CAME PS BARCODE Serie Manual De Instalación Y Manteniemiento

PS BARCODE -

Description of PS BARCODE system components

PSM3000 - Manned pay station with RBMP1 control board, management software, DISPLAY and PC50 interface for connecting to the PC.
PSE3000 - Entrance unit with transponder sensor for key cards and key fobs, ticket dispenser and display to allow registered users
to view credit.
PSU3000 - Exit unit with transponder sensor for key cards and key fobs, ticket dispenser and display to allow registered users to
view credit.
PSC3000 - Automated pay station with transponder sensor for key cards and key fobs, and display; without change return device,
with receipt dispenser.
PSC7000 - Automated pay station with PC, coin and banknote reader with change return device, credit card reader and ticket barcode
reader.
PSC7001 - Automated pay station with PC, coin and banknote reader with change return device, and ticket barcode reader.
PSI16 - Interface for connecting up to maximum 16 PSC3 units.
PSC3 - Manual auxiliary pay station with ticket barcode reader. When combined with the PSI16, it allows for the installation of a pay
station without the need for a stable connection to the PC.
PSIO1 - Auxiliary device controller for connection to PSSRV traffi c lights, PSINS luminous signs, magnetic sensors and safety sensors
(max. 8 exits).
GET - Token transponder.
PSINS - Double-sided illuminated parking spaces/full sign.
PSSRV- Traffi c light with ø 200 mm red-green lights.
SMA - Single channel magnetic sensor for detection of metal masses.
SMA2 - Dual channel magnetic sensor for detection of metal masses.

Technical data

PS BARCODE Power supply
RBMP1 230 VAC 50/60 Hz
PC50
DISPLAY
PSE3000 230 VAC 50/60 Hz
PSU3000 230 VAC 50/60 Hz
PSC3000 230 VAC 50/60 Hz
PSC7000/1** 230 VAC 50/60 Hz
PSI16 230 VAC 50/60 Hz
PSC3
PSIO1 230 VAC 50/60 Hz
* When the heating unit is ON, the resistor absorbs a further 500 mA, and requires another 90 W of power.
** PSC7000 also has a credit card reader.
Hardware and connections
Standby power
(mA)
35 mA AC
12 VAC 150 mA AC
12 VAC 150 mA AC
95 mA AC
98 mA AC
125 mA AC
360 mA AC
35 mA AC
12 VAC 195 mA AC
60 mA AC
Maximum Maximum power
consumption
- -
- -
- -
* 200 mA AC *46 W
* 110 mA AC *26 W
* 190 mA AC *44 W
* 400 mA AC *92 W
- -
- -
- -
Protection Operating
rating temperature
-
IP20
-
IP54
IP54
IP40
IP40
-
-
-
5