Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION AND SERVICE INSTRUCTIONS FOR MODEL AM100D DRIVER
SAFETY MESSAGE TO INSTALLERS, USERS AND MAINTENANCE PERSONNEL
It is important to follow all instructions shipped with this product. This device is to be installed by a
trained electrician who is thoroughly familiar with the National Electrical Code and will follow NEC
Guidelines as well as local codes.
The selection of the mounting location for the device, its controls and the routing of the wiring is to
be accomplished under the direction of the facilities engineer and the safety engineer. In addition,
listed below are some other important safety instructions and precautions you should follow:
• This is not a Listed safety device and is not intended to be used as such.
• Read and understand all instructions before installing or operating this equipment.
• Do not connect this unit to the system while the power is on.
• All effective warning speakers produce loud sounds which may cause in certain situations,
permanent hearing loss. You should take appropriate precautions such as wearing hearing
protection.
• All effective warning speakers produce loud sounds, which may cause, in certain situations,
permanent hearing loss. The device should be installed far enough away from potential listeners to
limit their exposure while still maintaining its effectiveness. The OSHA Code of Federal
Regulations 1910.95 Noise Standard provides guidelines which may be used regarding permis-
sible noise exposure levels.
• After installation, test the sound system to ensure proper operation.
• After testing is complete, provide a copy of this instruction sheet to all operating personnel.
• Establish a procedure to routinely check the speaker installation for integrity and proper
operation. Any maintenance must be performed by a trained electrician in accordance with NEC
guidelines and local codes.
Failure to follow all safety precautions and instructions may result in property damage, serious
injury, or death to you or others.
A. Description.
The Federal Signal Model AM100D is a heavy-duty, 100-watt, compression driver for use in
high-power public address installations.
The exterior is finished in durable, weatherproof paint and all metal parts have been tropical-
ized for resistance to high-humidity and fungus.
Ideal for both indoor and outdoor applications, these drivers are well suited for any installation
requiring rugged, high-power performance.
B. Model AM100D Specification.
Power Handling:
Impedance:
Nominal
Sound Pressure Level @ 1 meter:
Sound Pressure Level @ 10':
Frequency Response:
Construction:
Mechanical Connection of Driver:
* Pink noise band-limited from 400 to 4000 Hz using AM100H Horn.
100 watts
8 ohms
130 dBa*
120 dBa*
300 - 3000 Hz
Rugged die cast housing with weatherproof
finish for outdoor use.
1-3/8"-18 thread, 1/2" long
-1-
Publicidad
