Kenmore 146.23681310 Manual De Uso página 21

Bottom Shelf (continued)
IMPORTANT: Double check the positioning of all parts in this step before inserting and tightening screws.
Insert the two bottom shelf support bars through the square holes at middle of bottom shelf as
shown. Note: Insert the support bar with square cutouts at the rear of the bottom shelf.
Align the screw holes on bars with the holes on bottom shelf. Once in position, push down hard
on the bars to snap them all the way down.
Turn shelf right side up, and use (12) M6x40 screws and M6 flat washers to connect bars to shelf.
M6X40 screw Qty: 12 pcs
M6 flat washer Qty: 12 pcs
146.23681310 • 21