MADISON MAD-CENTER130CD-BK Manual Del Usuario página 8

3. Select the desired radio station by pressing the
4. Once you find a station you want to save, press the MEM button on the
remote control, "P01" will be shown on the display, press MEM+/MEM-until
the desired memory position number appears on the display. Press the MEM
again to confirm and save the current station.
5. (Auto) Press and hole MEM button. The unit will automatically start and
search the frequencies ,all available stations are programmed in the order of
waveband reception strength, the first programmed radio station is broadcast
automatically.
Please note: For optimal reception, fully extend and adjust the position of the
antenna.
Play from external audio
You can play from an external audio device such as MP3 player through this unit.
Line in Jack
1. Connect a 3.5mm cable to the Line jack on top panel. Connect the other end of
the 3.5mm cable to an Mp3 player or other audio device.
2. Press the button to turn the unit on.
3. Press the SOURCE button to switch to Line In mode.
4. Use the controls on the connected device to begin playing audio routed
through the unit.
5. You can connect any external audio line level equipment via an appropriate
lead such as a DVD player, stereo system, gaming system or television.
Using the USB/SD input
1. Plug your USB flash drive or SD card to the USB socket or SD slot
2. Press SOURCE button to select USB or SD mode, the unit can play
automatically. If not, press
3. Press the
4. Press the VOL+/VOL – to adjust the volume
Remark : USB/SD port is very sensitive so that the connected equipment might not
work properly.
©Copyright LOTRONIC 2018
/ to select track
/
8
button.
MAD-CENTER130CD