Names And Functions Of Parts - Kenwood SLG-7 Manual De Instrucciones

Names and functions of parts

Transmitter
¡ Analog input terminal (AUDIO IN)
Connect the stereo mini-plug of the
audio cable 1 connected to the
HEADPHONE terminal of a portable
audio player or the audio cable 2
connected to the LINE OUT terminals of
a stereo component.
™ USB input terminal (
Connect the USB cable connected to
a PC.
£ DC input terminal (DC5V)
Connect one of the AC adapters.
¢ Power switch key (POWER)
Press and hold to switch the power
ON/OFF.
∞ Channel selector key (RF)
Press to switch the channel or ID for
use in communication between the
Transmitter and the Receiver.
§ Input selector key
Press to switch between the analog
input and the USB input. Each time you
press the key, the input source switches
in the order of LINE, PHONES and USB.
English
¡ ™ £
¢
∞
§
¶
)
•
ª
¶ Power indicator lamp
(POWER/CHARGE)
The lamp lights green when the power
is ON. It lights red during recharging
(with the power OFF) and turns off
upon completion of recharging. It
flashes red when the built-in battery is
nearly exhausted.
• Communication indicator lamp (RF)
The lamp lights when the Transmitter is
communicating with the Receiver.
It flashes during registration of the ID.
ª Input indicator lamps
The corresponding lamp lights for the
input source selected with the input
selector key.
LINE lamp:
•
Lights when the line input is selected.
PHONES lamp:
•
Lights when the headphone input is
selected. (HEADPHONE)
Off:
•
Both LINE and PHONES lamps turn off
when the USB input is selected.
8