Scanning Tracks/Files (Scan); Repeating Individual Track/File Or Whole Directories (Repeat); Pausing Playback (Pause); Setting The Display - Blaupunkt Key West MP36 Instrucciones De Manejo E Instalación

MP3-/WMA- MODE

Scanning tracks/files (SCAN)

You can briefly play all the tracks/files
on the CD.
➮ Press the MENU button 9 for
longer than 2 seconds.
"SCAN" appears alongside the blinking
track/file numbers during the scanning
process.
Note:
You can set the scanning time
●
(scantime). For further details on
setting the scantime, please read
the "Setting the scantime" section
in the "Radio mode" chapter.
Stopping SCAN and continuing
playback
➮ Briefly press the MENU button 9.
The currently scanned track/file will then
continue to be played normally.
Repeating individual track/file or
whole directories (REPEAT)
To play the current track/file repeatedly,
➮ briefly press button 4 RPT ;.
"RPT TRCK" appears briefly in the dis-
play and RPT lights up.
To repeat the whole directory,
➮ press button 4 RPT ; longer than
2 seconds.
"RPT DIR" appears briefly in the display.
18
Cancelling REPEAT
To stop the current track or current di-
rectory from being repeated,
➮ briefly press button 4 RPT ;.
"RPT OFF" appears briefly in the dis-
play and the RPT symbol disappears.

Pausing playback (PAUSE)

➮ Press button 3
"PAUSE" appears in the display.
Cancelling pause
➮ Press button 3
pause mode.
Playback is resumed.

Setting the display

Setting the standard display mode
While playing MP3 tracks/files, you can
choose to display one of the following
standard display modes:
Track/file number and playing time
●
Track/file number and clock time
●
Directory number and track/file
●
number
Directory number and clock time
●
Directory number and playing time
●
The chosen display will be shown after
scrolling the MP3 texts at every change
of track/file.
To set the displays,
➮ press and hold down the DISPL
button 8 for longer than two sec-
onds to change the display mode.
Repeat this step until the desired
mode is shown.
;.
; while in