Intellinet Network Solutions 560771 Manual De Usuario página 2

16-Port Fast Ethernet PoE+ Switch • User Manual
Thank you for purchasing the Intellinet Network Solutions
Switch, Model 560771. For specifications, go to intellinet-network.com.
CONNECTIONS & INDICATORS
PoE
Link/Act
PoE
Power
Link/Act
LEDs
The LED indicators — Power,
PoE, Link/Activity — make it
easier to monitor the switch
and its connections. NOTE:
Only Ports 9-16 can provide
power to a connected device;
all powered devices should
also comply with IEEE 802.3af.
Ports
All ports on the switch support Auto-MDI/MDI-X functionality, so crossover cables and
uplink ports are not needed for connections to PCs, routers, hubs, other switches, etc.
Cat5/5e/6 UTP/STP cables provide optimal performance; if a status LED doesn't indicate
a link or activity, check the corresponding device for proper setup and operation.
Power
Use the included power cord to connect the device (next to the On/Off switch on the
rear panel) to an AC outlet. Confirm that the power LED on the front panel is lit.
INSTALLATION
Prior to use, it is recommended that the switch be placed/positioned:
• on a level surface with at least 25 mm (approx. 1") of clearance for ventilation;
• away from sources of electrical noise: radios, transmitters, broadband amplifiers, etc.;
• within 100 m (approx. 328') of network devices it's to be connected to.
Rackmount
The switch includes brackets and screws for optional rack mounting.
1. Disconnect any cables from the switch.
2. Position a bracket over the mounting holes on one side of the switch and secure it
in place with screws.
3. Repeat Step 2 on the other side of the switch.
4. Position the switch in the rack and screw the brackets to the rack.
5. Reconnect any cables.
2
ENGLISH
2 4 6 8 10 12 14 16
1 3 5 7 9 11 13 15
LED Status
Power On
Off
PoE On
Off
Link/Act On
Blinking
Off
16-Port Fast Ethernet PoE+
™
16 RJ45 10/100M ports (1-8 shown)
2 4
1 3
Operation
Power on
Check the AC connection; turn the power on
Port is linked to a PSE/PoE device
No PSE/PoE device is linked
Valid port connection
Valid port connection; data transmitted/received
No link established
English
6 8
5 7