Tabla de contenido
Publicidad
and chemistry of your battery.
5.) The mode LED will illuminate the selected charge mode and the Charge LEDs will illuminate (depending on the health of the battery) indicating the
charging process has started.
6.) The charger can now be left connected to the battery at all times to provide maintenance charging.
Auto-Memory: The charger has built in auto-memory and will return to the last charge mode when connected. To change modes after the first use, press
the mode button.
Understanding Charge LEDs.
LED
25% Red LED
50% Red LED
75% Orange
LED
100% Green
LED
Charge
Complete
Optimization
Bar LED
Explanation
The 25% Charge LED will slowly pulse "on" and "off" when the battery is less than 25% charged. When the battery is 25% charged, the
25% LED will go solid and the next LED will begin to pulse.
The 50% Charge LED will slowly pulse "on" and "off" when the battery is 25% - 50% charged. When the battery is 50% charged, the 50%
LED will go solid and the next LED will begin to pulse.
The 75% Charge LED will slowly pulse "on" and "off" when the battery is 50% - 75% charged. When the battery is 75% charged, the 75%
LED will go solid and the next LED will begin to pulse.
The 100% Charge LED will slowly pulse "on" and "off", when the battery is less than 100% fully charged.
When the battery is fully charged, the Green LED will be solid, and the 25%, 50% and 75% Charge LEDs will turn "off".
During Optimization, the Optimization Bar LED will chase slowly. Once the battery is fully optimized the Optimization Bar LED will turn off.
The charger can be left connected to the battery indefinitely.
Publicidad
Tabla de contenido
