Razor PowerWing 20036012 Manual Del Usuario página 5

SET-UP AND USAGE
1
Squeeze the hand lever to
test the brake to make sure it is
working. The front fender should
clamp down and rub against
the front wheel. If brake is not
working properly, proceed to the
next step.
Need Help? Visit our web site for replacement parts, product support and a list of authorized service
centers at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM
Pacific Time.
2
To adjust the brake play, thread
the brake lever adjuster in or out
1/4 to 1/2 turn until the
desired brake adjustment is
attained. Most adjustments are
complete at this step. If brake still
needs further adjustment, proceed
to the next step.
3
If the brake cable has too much
slack, use the front brake adjuster.
4
4
If the brakes are too tight or too
loose, use a 8mm open wrench and
a 3mm L-wrench for adjustment.