Installation And Commissioning - SATA 97925 Manual Del Uso

5 . Additional Safety Rules for Hot Air Gun:
1 ）Do not put your hand on the air inlet or block the air inlet in any form.
2 ）During the use, the temperature of nozzles and fittings of the tool becomes very high. Touch it after these parts are cooled down.
3 ）Please be sure to shut off the power supply before putting the tool down.
4 ）Do not leave the tool in an unattended state during the operation.
5 ）A hot air gun can cause a fire if it is not used carefully.
6 ）Do not use a hot air gun in humid area or areas with flammable or explosive gases.
7 ） Store the hot air gun after it is cooled down.
8 ） Ensure the proper ventilation, as the toxic smoke may be generated during the use of hot air guns.
9 ）Do not use it as a hair dryer.
10）Do not block the air inlet or outlet, otherwise the hot air gun may be damaged due to overheating.
11）Do not hold a hot air gun towards anyone.
12）Do not touch the metal air outlet. It will be very hot in use and also be hot within 30 minutes after the tool is off.
13）Do not put the hot air gun close to any object in use or immediately after use.
14）Do not allow anything to fall into the nozzle to avoid electric shock. The tool will produce high temperature when operating, thus do
not look down on the nozzle when starting up.
15）Keep the paint off the movable scraper at the air outlet, otherwise, the paint will burn after a while.
6. Removal of Paint:
1 ） Do not use the tool to remove the lead-based paint. The fallen paint, paint residue and smoke may contain lead which is a toxic
substance. Once left on the surface, hand-to-mouth contact may make you swallow lead. Very few of lead can even cause incurable
damage to brain and nervous system, and children and fetuses are more vulnerable.
2 ）Ensure that the site is closed when removing paint; and use a dust mask.
3 ）Do not burn the paint. Use a scraper and keep the distance between the air outlet and surface subject to paint removal at least 25
cm. If scraping the paint along a vertical direction, scrape it down to avoid falling into the hot air gun and burning it.
4 ） After the completion, thoroughly clean the site and remove the paint chips in a safe manner.

7. Installation and Commissioning:

Warning:
Before the installation and commissioning, unplug the tool!
14
97925
中文
EN DE RU KO PT JA ES