VITO PRO-POWER VILR800 Manual De Instrucciones página 10

EN
C) Disconnect the device from
its power supply before making
adjustments on the device,changing
mountings, or put it away.
Such safety procedures decrease
the chance of accidentally activating
the device.
D) Store unused electric tools away
from the reach of children. Do not
allow person that are unfamiliar with
the device, or have not read this
instruction manual, use the device.
Electric tools are dangerous, when
used by inexperienced persons.
E) Take good care of the device.
Check that moving parts work
properly, do not jam and are not
broken, so they cannot affect the
proper operation of the device.
Damaged parts should be repaired
before further use.
Many accidents are caused by
devices that are not properly taken
care of.
F) Keep your cutting tools clean
and sharp.
Carefully administered cutting tools
with sharp edges seize less, and are
easier to use.
G) Use electric tools, accessories
and othertools according totheir
respective instructions.Thereby
consider the workplace conditions
and the task.
Inappropriate use of electric tools
can lead to dangerous situation.
SERVICING
A) Allow quailed service personnel,
using original spare parts only to
Repair your device.
This maintains the safety conformity
of the device.
B) Should you have to replace the
power connection of the device, this
Should be conducted by the
manufacturer or a representative
only, to avoid Safety hazards.
10
C) Use this device for dry sanding
only. The device should never be
moist during use, or be used in a
moist environment.
D) Do not use this device stationary.
E) Keep the handles dry, and free of
oil or fats.
- Make sure that no alien objects are
stuck to the device, so as to prevent
damage to the belt sander.
F) Prior to every use, check the
device, the power plug and cable,
as well as the sanding band for
damage.
G) Confect the device to a power
supply only when the power switch
IS 0 .
H) Secure the device from slipping,
for example by using a screw-
clamp.
I) Use sanding bands of the correct
size only.
J) Always hold and apply the
device.
K) Using both hands.
DUST FORMATION DURING
WORK:
- Contact to, or breathing in of dust
can be a hazard for the person
using the device, or other persons
on the area. Consider that when
grinding, for example, paint that
contains lead, or some wood types
and metals, hazardous or poisonous
dust can form.
- Therefore always work with
mounted dust capturing equipment.
- Make sure the work area is
properly ventilated at all times.
- Never work on materials that
contain asbestos!
- Use appropriate safety equipment:
WEAR A DUST
PROTECTION MASK
When working on concrete and
other materials, dust can form that
is damaging to your health.
Always wear protective goggles.
Sparks, splinters and dust, that
develop while working, can cause
loss of eyesight.
We recommend the use of ear
protection.
Noise can cause loss of hearing.
OPERATION
Always pull the plug before making
adjustments of the device.
Installing the dust capturing
container
- Connect the dust capturing
container to your belt sanden This
will allow an optimal dust removal
during work.
This protects the device as well as
your health.
Additionally your workplace stays
cleaner and safer.
- Connecting an external suction
device: Connect a suction tube to
the suction
CONNECTION OF THE BELT
SANDER.
Make sure that the tube is properly
connected the connection of the
belt sander.
It should further be appropriate for
such use.
Emptying the dust capturing
container.