Kit Assembly - Metra 99-7802CH Instrucciones De Instalación

1. Attach the (6) factory panel clips to
the radio housing. (Figure A)
2. Attach the factory hazard button
to the 7802 radio panel using the
factory screws. (Figure B)
99-7802CH

Kit Assembly

(Figure A)
(Figure B)
ISO DIN head unit provisions
1. Mount the pocket to the radio
brackets with the (4) #8 x 3/8"
Phillips screws supplied.
(Figure A)
2. Slide the head unit into radio
brackets and secure with screws
supplied with the unit. (Figure B)
3. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
4. Mount the new radio assembly into
the dash and reassemble dash in
reverse order of disassembly.
3
(Figure A)
(Figure B)