Scope Of Delivery; Electrical Installation - AL-KO AMS2 MAMMUT Manual Del Usuario

en

Scope of delivery

Fig. 2-2: Scope of supply electrical installation single-axle
1 1x fuse holder
2 1x release line
3 2x fuses
4 2x wiring harness fuse holder
We recommend having all installation work carried out only by competent specialist workshops or
ADVICE
our AL-KO Service Centres.
Carry out electrical installations according to the applicable guidelines!
ADVICE

Electrical Installation

1. Select a suitable installation location for the battery (not supplied) of the Mammut power supply.
2. Make a sufficiently large opening in the caravan floor for the cables to the battery.
Make sure that there are no installations and/or weight-bearing parts in the area where you make
the opening!
3. Guide the positive and negative cables as well as the data cable for the drives through this opening
into the inside of the caravan.
4. Install the release sensor on the drawbar.
CAUTION!
Danger of breakage! Only tighten the nuts of the release sensor by hand! Do not use spanners
for the plastic nuts!
8
8
10 mm
3
1
5
4
5 1x fuse holding plate
6 1x battery terminal
7 1x protective tube
8 Tools (not included in the scope of delivery)
Installation instructions electrical single-axle
AMS2 Mammut
2
7
6